Type: Driver
File Name:
File Size: 38.0 MB
9 (3.04)
Downloads: 5
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. Avoid touching the components Biostar TA55MU3 AMD RAID motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water. The operating temperatures of the computer should be 0 to 45 degrees Celsius. The package contents may be different due to area or your motherboard version. Pull the lever toward direction A from the socket and then raise the lever up to a degree angle. Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle.


The CPU will fit only in the correct orientation. Hold the CPU down firmly, and then close the lever toward direct B to complete the installation.

Socket Fm1 Type

This completes the installation. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan Biostar TA55MU3 AMD RAID to the connector while matching the black wire to pin 1. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND. Unlock a DIMM slot by pressing the retaining clips outward.

Install memory module of the same density in pairs, shown in the table. Single or double side memory moudule 9 Motherboard Manual 2. PCI-Express Gen2 supports a raw bit-rate of 5.

Biostar TA55MU3 Drivers

PCI-Express supports a raw bit-rate of 2. Headers for USB 2. Consumer IR Connector This header is for infrared remote control and communication. Please carefully follow the procedures to avoid damaging the motherboard. Remove AC power line.

Wait for five seconds. Power on the AC. To make the two video devices work simultaneously and normally, please refer to the following setting. Single Channel or unbalanced memory does not support Dual Graphic function. NOTE The information described above in this manual is for your Biostar TA55MU3 AMD RAID only and the actual information and settings on board may be different from this manual. Set the BIOS setting as follows: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1 defines techniques for mirroring data. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel.

The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment.


This technique reduces overall disk access time and offers high bandwidth. Minimum 2, and maximum is up to 6 or 8. Depending on the platform.

Intended for non-critical data requiring high data throughput, Biostar TA55MU3 AMD RAID any environment that does not require fault tolerance. No capacity loss penalty for parity. Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored backup copy of the data can reside on the same disk or on a second redundant drive in the array.

Sony Vaio VPCEG2DFXDamaged or outdated Motherboard drivers
Asus X750JB Qualcomm Atheros WLANTo search drivers or utilities, select the motherboard model:
Icom IC-9100 TransceiverTo start the download, select one of the servers and click "download"

RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Minimum 2, and maximum is 2. RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal Biostar TA55MU3 AMD RAID. AMD Socket FM1 TA55MU3 Ver.

Liste des pilotes AMD à la catégorie Autres unités de commande et outils

6.x gaming motherboard's spec: Supported Socket FM1 processors AMD A-series/ E2-series processor; Supported AMD Mutil. Free Download Biostar TA55MU3 Ver. 6.x AMD RAID Preinstall Driver for Windows 7 (Motherboard).

Related Posts