D-LINK DIR-505L REVA1 ROUTER WINDOWS 8.1 DRIVERS DOWNLOAD
D-LINK DIR-505L REVA1 ROUTER DRIVER DETAILS:
|File Size:||30.5 MB|
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* (*Free Registration Required)|
D-LINK DIR-505L REVA1 ROUTER DRIVER
If OpenWRT firmware was previously installed on your router, be sure and disable Keep settings option during firmware upgrade. Configuring parameters Start your browser and in URL field type http: Be sure and set Autostart option.
This option is not active by default. Here you can set new Administrator password for access to the router setup and configuration.
With the reset button Locate the reset button on the back off the router While the unit is powered on, press the reset button with a sharp object e. The unit will reboot by itself and once the WLAN light stops blinking the factory D-Link DIR-505L revA1 Router is done.
You can now setup your router again through the user interface The reset If the above instructions don't work you can always try the reset as follows: From your laptop or mobile device, go to your Wireless Utility to display the available wireless networks and select the Wi-Fi name that is printed on the Wi-Fi Configuration Note included in your package ex: This information is also D-Link DIR-505L revA1 Router on the label on the base of the unit Step 4: Once you have established a connection between the DIR and your computer or mobile device, open a web browser and enter http: At the login page, enter the Administrator password in the Password field. If you have not changed the settings from the factory default, leave the Password field blank. From the main page of the configuration interface, choose the Setup tap at the top of the page, and then click LAN Setup from D-Link DIR-505L revA1 Router menu on the left-hand side.
Select Access Point or Router mode from the drop-down menu according to the required function. Use Access Point mode if you wish to use the DIR to provide wireless access to an existing network, or select Router mode if you wish to D-Link DIR-505L revA1 Router a private wireless network in order to share an Internet connection among wireless devices.
For Access Point Mode: You can enter a personalized name for your device in D-Link DIR-505L revA1 Router Device Name field. From the My LAN Connection is drop down menu, select the connection type which corresponds to your network connection type:Contact Premium Support.
This product has been discontinued. Free support for this product has ended on 01/31/ DIR SharePort Mobile Companion.
Step 1: Move the switch on the top of the DIR to the Router/AP position, then plug it in to an available wall outlet. Verify that the power LED has turned green Missing: revA1.