OVISLINK 56K OF56-C DRIVER FOR WINDOWS 10

OVISLINK 56K OF56-C DRIVER DETAILS:

Type: Driver
File Name: ovislink_56k_18578.zip
File Size: 26.7 MB
Rating:
4.71
4 (4.71)
Downloads: 3
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now
OVISLINK 56K OF56-C DRIVER



The first three steps are followed to unallocate chassis slots channels from time slots.

Click on the chassis slot that you want to change and respond Yes when asked to confirm. Repeat steps 1 and 2 for any other chassis slots you want to unallocate. Click on the unallocated chassis slot you want to allocate.

Click on the E1 time slot you want to allocate the chassis slot to. For chassis slots that use multiple time slots, click on the first E1 timeslot to be used. The chassis slot will turn white, and its corresponding E1 time slot s will darken. The selected chassis slot will turn yellow. Ovislink 56K OF56-C selected chassis slot and time slot s will turn light green.

Network Management System and ICB Management System Software User s Guide - PDF

If a chassis slot does not have a card plugged in, the chassis slot channels will not be displayed. Timeslots that are not dropped must be set to broadcast on both the Primary and Secondary E1 to pass data from one E1 to the other E1. Timeslots to be blocked between E1s should have the timeslot mode set to idle on both the primary and secondary E1 timelsots. Setting the Time Slot Mode 1. Select the mode you want the time Ovislink 56K OF56-C set to. Select the time slot you want to edit. Changes the slot information to the corresponding color.

Repeat steps 1 and 2 for any other slots you want to change. Click Close to save changes and close the dialog box. Once retrieved, system status will be displayed in the main screen as shown in Figure Screen showing retrieved status in the Message area and the Alarm area 6. Retrieves the parameters of the E1 card and displays them in the Message area of the main screen. Retrieves any current alarms on the E1 card and displays them in the Alarms area of the main screen. Use the following steps to retrieve inventory data. Select Status Retrieve Inventory Data. Opens a dialog box asking you to select Ovislink 56K OF56-C card you want to retrieve data for.

Manufacture

Select the card that you want to retrieve inventory data for. Only cards which are actually installed in Ovislink 56K OF56-C system will be displayed. Displays the card firmware version in the message area of the ICB manager screen. Use the following steps Ovislink 56K OF56-C retrieve the channel status. Select Status Retrieve Channel Status.

Displays the channel status of all installed cards in Ovislink 56K OF56-C message area of the ICB manager screen. The channels are displayed in numerical order. Use the scroll bar to view each channel. Retrieved Channel Information 6. Opens the current alarm log file. Opens Ovislink 56K OF56-C current event log file. E1 loopback tests will affect the service of the card.

OVISLINK 56K OF56-C WINDOWS VISTA DRIVER

Select Loopback Initiates the loopback. Results will be displayed in the alarm status area of the main screen see Figure E1 loopbacks will not function if the ICB is in alarm. Select the Loopback or Release tab. Check the box beside the channel numbers you are using. Select OK Initiates the loopback Ovislink 56K OF56-C release. A loopback test can not be done on a channel that is busy, but a channel that is in loopback can be forced busy. This is a network loopback. Check the box beside the channel numbers you are testing.

OVISLINK 56K OF56-C DRIVER FOR WINDOWS MAC

A loopback can not be done on a channel that is busy, but a channel that is in loopback can be forced busy. Select Ovislink 56K OF56-C the channel you Ovislink 56K OF56-C the loopback test run on. Select the loopback type. Select Activate Initiates the loopback or release. SinceOvisLink has been a major producer of networking products. OvisLink is a fast growing multinational company, one of the largest.

Ovislink OVC DriverOvislink 56K OFC 32bit Vista Driver

Related Posts