DRIVERS FOR WEIGL WORKS WEMC-1 CONTROLLER
WEIGL WORKS WEMC-1 CONTROLLER DRIVER DETAILS:
|File Size:||23.3 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
WEIGL WORKS WEMC-1 CONTROLLER DRIVER
Fade to level in time Output channel: Set PWM output 3 to level Increment PWM output 2.
Decrement PWM output 2. Add 10 to current value PWM output 6; maximum limit: Fade PWM output 3 to level in seconds. Fade PWM output 5 to 8 to 0 position in 1 second.! Send serial Data Maximum RS characters ! Maximum IP characters !
Data to be sent! Fade to 0 in 10 seconds of all analog channels in the network system.! Set all DMX channels from 10 to to value !
If all the channels does not fit within the character limit, several consecutive commands with different address settings must be sent.! Fade all DMX channels from 5 to 20 from current value within 5.
Set key mask Key mask; left alignment! Input 1 and 4 are enabled, 2 and 3 are disabled. The remaining inputs are not affected.
Download Weigl Works Firmware drivers
All 16 inputs are disabled. Set output 17,18,19,20,26,30 and 32; clear output 21 25,27 29 and Set outputs 1, 15 and Clear outputs 1, 15 and Weigl Works WEMC-1 Controller output 17,18,19,20,26,30 and ! Digital channels are set to 0, Analog channels fade to 0 based on the EaseInTime. Set digital mask Digital mask for max.
On the Susceptibility of Micro-controller to Radio Frequency Interference
The left most 0 or 1 is channel 1. Not addressed channels are not affected. No further commands from Weigl Works WEMC-1 Controller or show are mapped to the outputs. This allows direkt control of outputs via inputs regardless of show content. Output 2 and 3 are masked, 1 and 4 are not masked. The remaining outputs are not affected.
- WEMC-1 Weigl Control - Animatronics and Motion Control
- Supported DMX Interfaces
- Weigl Works driver categories
- Weigl Works driver categories
- Looking for the full-text?
- Weigl Works Drivers
Weigl Works WEMC-1 Controller No further commands are mapped to output 2 and 3. This allows direkt control of outputs 2 and 3 via inputs regardless of show content.! All masked channels are switched off! The roles of various model components on the immunity are analyzed by comparing the simulation results from different model structures. In some embodiments, the PWM output module 52 can include six PWM output channels in order to control one or more inverter drives 53 that can supply three-phase power to the motor The PWM output module 52 can use a switching frequency of about 7.
The PWM output waveforms can be symmetric and can be operated in a manner consistent with space vector pulse-width modulation SVPWM firing sequences, as will be described in more detail below. The event manager peripheral module 50 in the DSP 26 can control the PWM output waveforms, as well as their dead band timers. The controller 24 can include one or Weigl Works WEMC-1 Controller types of memory, for example, program memory FLASHprimary data memory, and secondary non-volatile data memory e.
WEMC-1 Weigl Control - Animatronics and Motion Control
The controller 24 can also include a serial communication link 56 e. In some embodiments, the serial communication link 56 can be permanently or removably connected to an external device 58, such as a personal computer, a laptop, or a personal digital assistant PDA running a terminal program Weigl Works WEMC-1 Controller e. In some embodiments, the data from the terminal program 60 can be transferred to the DSP 26 from the microcontroller The data from the terminal program 60 can be limited to ASCII printable standard characters and can be interleaved with control data packets. The most significant bit of the data byte being sent can be used by the DSP 26 to identify the control data packets.
In some embodiments, a user can access the controller 24 with the external device 58 in order to configure drive parameters, to manually run or stop the Weigl Works WEMC-1 Controller 46 to the motor 16, or to read one or more of the Weigl Works WEMC-1 Controller parameters: Many of these parameters will be discussed in more detail below with respect to FIGS. A user can also enter one or more of the following commands via the external device 58 and the serial communication link With the introduction of our X-Series ProCommander® controllers & digital motion control platform; Weigl continues pushing what's possible in entertainment. Pro I/O™ interfaces are network devices for controlling and interfacing with many types of external equipment. Pro I/O's are extremely flexible in handling.