Type: Driver
File Name:
File Size: 10.4 MB
14 (3.92)
Downloads: 6
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now

P2B-LS memory

Like I said before, I have the celeron running at I like it Asus P2B-LS because it is so stable, and I would basically consider overclocking a cpu again as long as it is as reliable as this one and I dont have to do all kinds of crazy things to get it stable. So if you have any advice Asus P2B-LS to what I should look into that would be great. This depends on the slotket and your cpu.

The possible jumper settings are usually printed on the Asus P2B-LS of the slotket. There are two settings which are important however most times: The voltage if your slotket has voltage adjustment jumpers. If you have a board not capable of delivering voltages below 1. The Asus P2B-LS type jumper.


So, for old celerons up touse the celeron setting, for anything else including newer Celerons, PIII, modified Tualatins set it to coppermine. In this case, set it to ppga for old Celerons, fcpga for anything else. Asus P2B-LS

P2B-LS largest hard drive support?

The FSB setting of the slotket can safely be ignored, since you need to set it on Asus P2B-LS board anyways at least on the boards of the P2B family. Some of the early revision boards have a known design flaw which limits the amount of Asus P2B-LS through the USB bus too much. If you have a revision 1. R is located near the BX chip. If you have a P2B-F, the 4.

Asus P2B-LS Manual

The resistor could also be 47 Ohm instead, in this case USB might work fine in a lot of cases. If you have a P2B-D2, I've not the slightest clue what number the Asus P2B-LS has, but reports seem to indicate this board is affected from this bug too. If you have another P2B board, it is probably not affected. But before you heat up your soldering iron, make sure it's not a different Asus P2B-LS why USB doesn't work.

For instance, early bios versions of some of the boards have bugs which affects USB operation. Asus did this fix for you, but I guess Asus P2B-LS warranty time of your board is over now. The old Slot1 Celerons are not dual capable neither. Keep in mind not only the cpus must be dual capable, but also the slotket! There are quite a lot of slotkets which are dual capable, but most of them only work in dual mode with the Celeron ppga. More information Asus P2B-LS be found, as always, at asus.

  • Asus P2B-LS Manuals
  • Board:asus/p2b-ls

Asus used to fix the boards, but probably the warranty of your board has expired. Historically there a lot more reported issues with Asus P2B-LS upgrades with dual processor configurations than Asus P2B-LS single processor configurations, but it is possible this is only due to the use of inappropriate slotkets. Technically, it's an insufficient buffering of the bus termination voltage, which can cause voltage drops and thus hang the system.

The reason it is named Photoshop bug is because the bug is not easily recognized, but using Photoshop reveals it, since it will crash frequently. Asus Condition:P2B-LS. Select Other Model. Quickly access your Asus P2B-LS support. REGISTER YOUR PRODUCT · CPU / Memory Support · Driver & Utility · FAQ · Manual &. P2B-LS. Asus P2B-LS

Select Other Model. Quickly access your product support. REGISTER YOUR PRODUCT P2B-LS Beta BIOS The latest Beta BIOS.


Related Posts