Type: Driver
File Name:
File Size: 1.4 MB
26 (3.61)
Downloads: 15
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* (*Free Registration Required)

Download Now

If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

D-Link Technical Support

It is worth reading more about D-Link DAP-1350 Wireless Router to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it. Default factory settings for D-Link DAP rev A1 If you have performed a reset of your DAP rev A1 device or not changed the defaults, you should be able to access it with the following settings: WPA provides a higher level of security.

WPA-Personal does not require an authentication server. Enable Wireless This option turns off and on the wireless connection feature of the router. When you set this option, the following parameters are in effect. Scheduling for Wireless Settings When Wireless is enabled, the default selection for scheduling is "Always". Selections for other schedules will be available in the drop down menu after users define schedules in the D-Link DAP-1350 Wireless Router page. This function gets disabled when wireless is disabled. Wireless Network Name When you are browsing for available wireless networks, D-Link DAP-1350 Wireless Router is the name that will appear in the list unless Visibility Status is set to Invisible, see below. This name is also referred to as the SSID.


For security purposes, it is highly recommended to change from the pre-configured network name. Enable Auto Channel Scan If you select this option, the router automatically finds the channel with least interference and uses that channel for wireless networking. If D-Link DAP-1350 Wireless Router disable this option, the router uses the channel that you specify with the following Wireless Channel option.


Wireless Channel A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices.

Choose the clearest channel to help optimize the performance and coverage of your wireless network. Wireless Mode If all of the wireless devices D-Link DAP-1350 Wireless Router want to connect with this router can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode. The other options are available for special circumstances. Visibility Status The Invisible option allows you to hide your wireless network.

D-Link DAP 1350 Reviews, Specification, Price & Best Deals

When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network.

  • DAP Wireless N Pocket Router / Access Point - D- Link India Limited, Mumbai ID:
  • Dlink DAP Setup Help Router Screenshot -
  • Setup Help for the Dlink DAP-1350Router Sceenshot
  • Techdata: D-Link DAP-1350 A1
  • Login to the Dlink DAP-1350 Router
  • D-Link DAP-1350 300 Mbps 1-Port 10/100 Wireless N Router

Security Mode Unless one of these encryption modes is selected, wireless transmissions to and from your wireless network can be easily intercepted and D-Link DAP-1350 Wireless Router by unauthorized users. WEP is disabled by default. The WEP setting can be changed to fit an existing wireless network or to customize your wireless network.

Note that, if you enter fewer characters in the WEP key than required, the remainder of the key is automatically padded with zeros. The WPA Mode further refines the variant that the router D-Link DAP-1350 Wireless Router employ. WPA is the older standard; select this option if the clients that will be used with the router only support the older standard. The encryption algorithm used to secure the data communication. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless D-Link DAP-1350 Wireless Router. Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. The IP address of the authentication server.


The port number used to connect to the authentication server. A pass-phrase that must match with the authentication server. The IP address is also used to access this Web-based management interface.

DAP Wireless N Pocket Router & Access Point D-Link UK

It is recommended that you use the default settings if you do not have an existing network. Your local area network settings are based on the address D-Link DAP-1350 Wireless Router here. Small enough to carry with you, the Wireless N Pocket Router and Access Point (DAP) easily sets up to create a powerful 11n Wi-Fi network, making it the. Contact Premium Support. This product has been discontinued. Free support for this product has ended on 03/01/ DAP Wireless N Pocket Router.

Related Posts