NEW DRIVER: ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVER DETAILS:

Type: Driver
File Name: allied_telesis_21896.zip
File Size: 18.6 MB
Rating:
4.74
9 (4.74)
Downloads: 4
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* (*Free Registration Required)

Download Now
ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVER



Installation Manager Success Stats: File name: VeriSign Inc Download Size: The ATT adapter is shipped with the standard bracket attached to the adapter. Depending on your PC, you may need to replace the bracket attached to your adapter. The following procedure describes how to remove the low-profile bracket from the adapter and replace it with the standard bracket.

You can also use this procedure to remove the standard bracket and replace it with the low-profile bracket. To replace the low-profile bracket with the standard bracket, perform the following procedure: Remove the screws that attach the bracket to the adapter.

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVER FOR WINDOWS MAC

See Figure 5. TX RX 10 0 Figure 5. Removing the Low-Profile Bracket 25 Chapter 2: Installing the Hardware 2.

Align the tabs of the standard bracket with the holes on the adapter and fasten the screws onto the adapter. See Figure 6. TX RX 10 0 Figure 6. For details about performing these tasks on your particular system, refer to the manuals that were supplied with your system. Note To perform this procedure, you need to supply a Phillips-head screw.

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVERS FOR WINDOWS

Before installing the adapter, ensure the system power is OFF and unplugged from the power outlet, and that proper electrical grounding procedures have been followed. Warning High voltage inside the system presents a safety hazard. Make sure the power is off before removing the cover.

Allied Telesis AT-2712FX 100Mb Fiber Ethernet network drivers

Remove the system cover and select any appropriate empty PCI slot. See Figure 7 on page If you do not know how to identify an appropriate PCI slot, refer to your system documentation. Installing the Hardware Figure 7. Removing the PC Cover 3.

ECS PA1 MVP Lite (V2.0)Search refinements
Packard Bell EasyNote LS13SB Broadcom BluetoothDownload and update Windows drivers

Select an empty, non-shared PCI slot and remove the faceplate. Keep the faceplate in a safe place.

You may need it for future use. See Figure 8.

Allied Telesis

Figure 8. Remove the network adapter card from the shipping package and store the packaging material in a safe location.

Caution Wear a grounding device and observe electrostatic discharge precautions when installing the network adapter card in a system. Failure to observe this caution could result in damage to the card.

Applying even pressure at both corners of the card, push the adapter card until it is firmly seated in the appropriate PCI slot. Make sure the card is securely seated. To insert the network adapter card, see Figure 9. Cherry MX Red switches operate with an actuation point of 2 mm. Please enter 5 or 9 numbers for the ZIP Code. Alternatively, the MissingLink feature allows accurate reporting to network management systems as well as allowing devices with Allied Telesis AT-2712FX 100Mb Fiber Ethernet link capability to be inter-connected with these media converters, as a failure in one fiber link will be signalled Allied Telesis AT-2712FX 100Mb Fiber Ethernet the switch, allowing the second link to become active.

Allied Telesis Product Selector - Network Interface Cards

FX Series. Fast Ethernet, PCIe Fiber Adapter, Secure Great for fiber to desktop networks that depend on secure and reliable systems; Advanced. FX. Fast Ethernet, PCIe Fiber Adapter, Secure Great for fiber to desktop networks that depend on secure and reliable systems; Advanced centralized.

Related Posts